No Sew Bedding

How to make dollhouse bedding without a sewing machine

You will need:-

- Good Quality Craft Glue or Fabric Glue (See my post on glue options here)
- Different fabric scraps to use as your bedding
- thick cardboard or poster board

Cut your fabric slightly larger than the size of the bed you require it to fit.

To give the effect of a sheet folded over a blanket/duvet cover, you can fold a plain white strip of fabric over the top of your chosen patterned bed cover.

You can simply glue the edges together with fabric glue so that you do not need to use a sewing machine.

 Fold the white 'sheet' over the top edge of your patterned fabric to create the look of a turned down bed.

I placed a small amount of quilting filling between my sheet and the poster board so that the bed looks nice and comfy, but you could also just fold some more fabric under the top cover to make it look a little more 'plump' as well.





Cut a piece of cardboard to fit your bed like a mattress, (so that it sits neatly on the top of the bed).

Fold your fabric over the cardboard and tuck the ends in similar to wrapping a gift.  You do not need to make the underneath all too tidy as you can stick it directly onto your bed base as shown in the diagram below.

You can also make some cushions using fabric glue.  The black and white cushion below is just a length of fabric rolled in a cylinder shape and glued along one edge.

Hanging Mirror

How to make a miniature hanging mirror

You will need:

Round Mirror (best place to find one of these is inside your make up compact case)
Orange Power Glue remover (or similar product which dissolves glue)
Poster Board or craft cardboard
Fast setting glue.

If you plan on using the mirror from your make up compact, the best way to detach the mirror is with using Planet Ark Orange Power stick spot glue dissolver.

Start by placing a few drops of glue dissolver around the edges of the mirror.  Using a knife or box cutter very gently slide the blade between the mirror and the compact so that the glue dissolver and run under the mirror to reach the glue.  Keep adding drops of glue so that it can run underneath the mirror.  Be patient and give the glue dissolver time to work.

Keep using the knife to gently try and pry the mirror off.

Once you have the mirror free from the compact you can measure a length of cardboard to use as your mirror hanger.

Use fast setting glue to attach the length of cardboard to the edge of the mirror - in effect the cardboard is just for show.  Always attach the mirror directly to the dollhouse as it is heavy and should be secure from children prying it off.

Jute Rug Tutorial

Step by step instructions on how to make a modern Jute Rug for your dollhouse.

What you will need:

- Thin cardboard (cereal box or similar) or thick scrapbooking paper ;

- Ruler;

- Jute rope;

- Double sided tape OR craft glue OR hot glue gun;

For the rug in this tutorial I used my glue gun - and now I have thrown it in the bin.  I don't know who thought a hot glue gun is a good idea but I personally think they are rubbish!  I thought  it might hold my super heavy duty Jute rope better (which I guess it did....) but they are just sooooooo messy, and you need to work very quickly as the glue drys way to fast, especially for this task which is a little tricky and you need a bit of time to make it look nice.

I have made jute rugs in the past and I think the easiest option is to use double sided tape, especially if you are using the thin Jute string.

Step 1

Start by measuring the space you want the rug to fit into so you can map this out on your cardboard.

Step 2

Draw a cross in the middle of your cardboard to give you a starting point and a guide to keep your circle even once you start glueing the Jute string down.  If you deicide to use double sided tape, which I would suggest as being the easiest way of doing this for first timers, start by laying the tape out on the cardboard in a asterisk (*) shape.

Place one end of the string across your centre +, you want the 'tail' to be a little long so that you can 'run it over' with your coil and this will hold and hide the end of the string in place.




Step 3

Start sticking the string down, wrapping it around itself.  If you are using double sided tape you can take your time to ensure you are keeping your circle even, and if you go a bit wonky it is easy to pull the string up and lay it back down again.











Step 4

Now if you have had enough of gluing and sticking string down you can simply stop at a simple circle shape.  (see step 5 on how I finish off the end to stop it unravelling).

But if you want to make it look a little more fancy, you can add smaller circles.  Start by laying one out to decide how big you want the decorative feature to be, then cut 10-15 strips of jute to the same size (you may require more or less).  Cutting lengths of jute for the smaller circles makes the jute easier to work with, as well as helping in getting similar sized circles.

Keep going all the way around, try to keep turning the rug so you are working on the space in front of you, adding the smaller circles around the boarder can be a little more fiddly but don't worry too much about the 'tail' ends and where they end up because if you do a 'boarder' you can 'run' them over and tuck them away.

You will see that some of my circles go in opposite directions, but just do what is easier for you as once you lay the boarder you can't really tell which way the circles are running.










Step 5 

To finish off it is best to try and tuck the 'end' back under the outside coil.  If you can get it tucked back in towards the middle of the rug you can just tape it to the under side of the rug.

Below are 3 different rugs which I have made, The first rug is made of 3 different types of string, Jute lace (found at the local junk shop) jute string, and cotton string.
Bottom rug is just thin jute string held down with double sided tape.  The big rug is made from jute rope and I just the hot glue gun as this string was far too heavy for double sided tape.